Average Reviews:
(More customer reviews)Before I ever installed the unit, I already had a bad feeling about it. Being intrigued by new stuff, I pulled it apart to inspect. What I found was worse than what I expected. The comments below are in addition to the comments already made & you should take theirs into consideration as well.
1. The unit weighs almost nothing. That hints at a lack of components & heatsink (which would be necessary if it had decent amplification).
2. There are NO RCA outputs on this unit, so no amplification is possible.
3. The lack of RCAs isn't missed much, due to the fact that the unit outputs to mono (yes, I was amazed to find both the left & right speaker wires coming out of the exact same solder joint.
4. The radio is really only capable of running two speakers (only has wires for two as well) & pushing 4 would likely run it into distortion quickly.
5. The radio used antiquated common ground speaker outputs. This is something that I haven't seen since the 80's. It means that the entire chassis of the car is used for the negative on the speakers. It's not a good thing for noise at all (whining).
6. The knobs on the unit are actually knobs. Like the kind you found on radios from the 80's. This means that the radio's tuning isn't digital & there are no seek functions or presets. It also means that the volume knob is really hard to use.
7. It appears that most of the solder work on the board is hand done (common of Chinese products) & not in a good way (I saw what are likely cold solder joints).
7. All of the buttons on the unit feel like they are the poor kind of microswitches that I only see on equipment that fails within a few months & so I wouldn'texpect much more out of these.
9. Top everything off by a MP3 menu system that is from the early days of MP3's & you really don't want this radio.
Click Here to see more reviews about: PYLE PLR24MPF AM/FM Receiver MP3 Playback with USB/SD/AUX-IN
This Pyle head-unit is loaded with great features, including SD card playback. It will also play MP3s from a USB stick and has an aux-in jack conveniently located on the front so you can hook up your MP3 player or iPod. Of course, it\'s also equipped with an AM/FM radio with tone control, last-track memory, and an LCD digital display. The cool blue screen shows clock info, the station, and your music\'s ID3 tags. Easily navigate folders using the illuminated interface. This unit pumps out 100 watts on each of its two channels, so it\'s not lacking for power. Outputs over stereo RCA. Includes screws and mounting hardware.
Click here for more information about PYLE PLR24MPF AM/FM Receiver MP3 Playback with USB/SD/AUX-IN
0 comments:
Post a Comment